How to Sew Waterproof Fabric!

Here’s a quick ‘how to’ on sewing with waterproof/water-repellent fabric:

Most waterproof fabric tends to be tightly woven and can ravel quite badly. Some don’t though. The nature of these fabrics is that they are chemically treated and have a coating on them which makes them repel water. Waterproof fabrics come in all sort of thicknesses and finishes from Gore-tex to waterproofed silk.

  • The coating on the fabric makes it quite easy to get stuck under the presser foot.
  • One of the most important things to remember though is that these fabrics are damaged by pins and irons! So use things like paperclips, bulldog clips or hair clips in place of those dressmaker pins!

  • Because waterproof fabric repels water it therefore also traps moisture – so they don’t breathe very well like natural fabric. So before you begin – place a drop of water on your fabric – if it forms a perfectly round bubble on top of the fabric you definitely have a waterproof fabric – So in order to prevent yourself becoming a sweaty betty you need to compensate for this by inserting grommets, eyelets or air vents to help air circulate.
  • Make sure you use a ‘sharp’ or a ‘microtex’ needle and in the smallest size that is able to stitch without skipping stitches.┬áThe larger the needle, the larger the hole obviously – making your seam less waterproof!

  • You can counteract the stickiness of the coated fabric under the presser foot by using things like talcum powder, cornstarch, tissue paper or a teflon foot
  • Thread – Make sure it’s polyester, as they are mildew resistant.
  • French, standing fell, piped and strap seams repel water better than top stitched, welt, double welt and flat felled seams.
  • Use a seam sealer such as Seam Sure to prevent water leaking through the seams. Apply this to the wrong side of the seam, in a well ventilated room. Also make sure you test this on a small piece of fabric to ensure no fabric staining/marking. Then leave it to one side and leave it to dry overnight.

  • Lastly, Use a very cool iron to press open your seams as heat can destroy the coating on the fabric that makes it waterproof

References: Fabric Sewing Guide (2nd Edition) – Claire Shaeffer, Krause Publications, Cincinnati (2008)

9 thoughts on “How to Sew Waterproof Fabric!

  1. Karin says:

    Interesting. I have been toying with the idea of making my little ones some waterproof overalls, so this is all good information to think about. Thanks!

  2. Sam says:

    Brilliant tutorial, thank you for sharing! The sharpes needles are my favourite I use them 99% of the time for sewing and embroidering!! Thanks again

  3. J FT says:

    You can also use a waterproof seam sealing tape, which is applied using a standard domestic iron very effective, mostly it is used by manufacturers, very easy to apply, and not so messy as glue, also leaves a clean finish, can be purchased from comes in large rolls of 50mtrs

  4. Heather says:

    Thank you for your knowledge. Was thinking of making an outdoor bench cushion for my arbour. Will definitely have a go now.

Leave a Reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s